The pore doesn't widen. The frame around it loosens.

I'll show you what makes it look large, and exactly what data exists on it. All three numbers, along with what each one actually measures.

Close-up macro of skin: visible pores and texture
14,990 Ft the full price cash on delivery too 8 reviewsJudge.me See the Dermastamp
4500+ Hungarian followers on TikTok, Instagram, Facebook
EU MDR Class I registered as a medical device
Tap to see what stands behind it
Research C Mechanism only
  • The hypothesised mechanism: the needling targets the collagen framework around the pore.

What it's good for, and what it isn't

Skin texture, the appearance of pores: the mechanism is defensible, several trials show improvement.

Making pores disappear: the opening remains, anatomically.

Only start if you can take sun protection seriously. Because of the fresh microchannels, the skin is temporarily more sun-sensitive: no direct sun or tanning beds for 24 hours after treatment, and from the next morning, SPF 50 sunscreen every morning. UV breaks down collagen and can cause pigmentation, so without sun protection, UV can undo what needling started.

The opening doesn't grow, the frame around it loosens

loose collagen frame sebum plug ! What you see the frame loosens, the plug pushes tighter frame What the needle does new collagen around the opening the opening stays anatomically the same, its appearance changes

The pore is the opening of the sebaceous gland. Anatomically it doesn't widen, the collagen frame around it loosens, and the sebum plug pushes it out from inside.

More details

Three causes together: (1) the dermis's collagen and elastin network gives way, so the firmness around the opening is lost; (2) the full sebaceous gland channel widens the opening from inside; (3) the epidermis thins (age, UV), so the "frame" is weaker.

A pore-tightening toner doesn't affect the first one, it only temporarily tightens the surface.

What data exists on it, and what each one measures

WHAT DATA EXISTS. AND WHAT IT ACTUALLY MEASURES ! n = 30 · botox both arms received botox, not microneedling data PMC12169069 · the "pore RCT" isn’t about microneedling ~ 41,7% fractional MN-RF, clinical RF device pore diameter, histology · radiofrequency device ~ 23,9% vs 6,8% vitamin C + microneedling vs microneedling ONLY PMC12912124 · n=31, blinded, the microneedling-only arm improved too

Three numbers circulate about pores. What each measures, and which counts as evidence.

More details

The "pore RCT" (PMC12169069, n=30): both arms of the trial received botulinum toxin injections (intradermal vs. delivered via microneedling). There was no significant difference between the two methods, meaning this is about delivering botox, not about whether microneedling on its own tightens the pore.

41.7%: histological pore-diameter reduction with a fractional MN-RF (radiofrequency) device, a stronger, clinical intervention.

23.9% vs 6.8%: a double-blind, split-face trial (PMC12912124, n=31): the vitamin C side improved far more, but the needling-only side improved too, modestly. This is the clearest sign that needling on its own does something for texture.

Will it scar my skin?

MANY TINY, SEPARATE intact skin remains between them ✓ regenerates CONTINUOUS, DEEP no intact island ✕ scar

The needle makes many tiny, separate punctures: intact skin remains between them, and regeneration starts from there, which lets it heal without scarring. Linear, "tram-track"-like scars come from sideways movement (dragging), and the stamp rules that out exactly: one press, one lift, no dragging.

More details

The dermaroller drags by nature: it rotates, goes in and out at an angle, that's the "tram-track scar". The motorized pen is a vertical device, but it runs continuously: if you drag it across the skin instead of lifting between two points, a linear mark can form there too. That's user error, but an easy one to make. The handheld stamp works without a motor or rotation, at a fixed 1 mm, in a single motion: there's nothing to get wrong about the movement. That's why, for home use in an untrained hand, this is the most controllable, hardest-to-mess-up form, you stay in control the whole time. Press down gently, especially over bony areas. The depth comes from the fixed 1 mm needle.

What the needle does in the skinThe cross-section + the collagen-maturation timeline
Epidermis Dermis, this is where the collagen is Subcutis new collagen

The needle reaches down to the dermis, where the collagen sits. Healing builds new collagen, which can pull the frame back around the pore.

More details

The wound-healing signal (TGF-beta, PDGF, VEGF) activates fibroblasts → a denser dermal matrix around the pore opening.

Tissue remodeling also reshapes the surroundings of the sebaceous gland → a narrower outlet channel, less sebum through the opening. This is what a cream can't do: it acts below the surface.

A patience game: what you see, and when

Day 0puncture dayshealing weeksnew collagen 3-6 momature

New collagen builds up over weeks, and fully matures in 3–6 months. It's slower for pores than for acne scars, which is why sessions are spaced further apart.

How to use it, the full protocolStep by step, from preparation to disposal
How often

One session every 2–3 weeks, in the evening, for at least 4–6 treatments. On the same area, no sooner than two weeks later, always with a new stamp.

Before

Wash your hands with soap. Wash your face with a gentle foaming cleanser; micellar water isn't enough here. Start without makeup, on completely dry skin.

The device

Open it right before use, and don't touch the needles. Rinse the needle head with warm water, then disinfect it with 70% or stronger alcohol for 60–120 seconds. Wait until it is completely dry.

Stamping

Divide the area into smaller sections. Place the stamp perpendicular to the skin, press down gently, and lift. You don't drag it, you just press. 4–6 times per section, each time a little further along. Mild redness and tiny pinpoint bleeding are normal.

That evening

Don't rub it or wash it off, let it dry on its own. Don't put anything on it that day.

The next morning

Foaming cleanser, Centella serum, moisturiser, and finally SPF 50. From this day on, you need sunscreen every morning.

Avoid

For 24 hours: makeup, swimming pools, saunas, tanning beds and strong sun. Retinoid and vitamin C: the user guide says 24 hours for retinoids, I wait 48 hours to be on the safe side. Acid exfoliants (AHA/BHA): at least one week, a published review recommends this. Every skin is different, find out what works for you.

Never on active acne, broken or inflamed skin.

Disposal

One stamp, one session. Put it back in its case and throw it away, closed, with your household waste.

Needle length

Fixed 1.0 mm. It can't be adjusted, so you can't accidentally go deeper.

Frequently asked questions

Will it make my pores disappear?

No. The pore is the opening of the sebaceous gland, it remains, anatomically. What can change: the firmness of the frame around it and the sebum plug, in other words its appearance.

Doesn't needling clog my pores?

No. The needle's microchannels are not pores, and they don't stay open: the skin closes them on its own. The redness after treatment is not an "open pore".

That's why you put nothing on it that evening, and the next morning simple products follow: Centella serum, moisturiser, SPF 50.

Isn't retinol or a pore-tightening toner enough?

They work at a different level. The toner temporarily tightens the surface. Retinol speeds up shedding.

Needling rebuilds the frame at depth. They complement each other, just leave out the retinol for 48 hours after the treatment.

Who this is NOT for

Not with active, inflamed acne. The needle spreads the bacteria around. Let a dermatologist tell you first when you're ready.

The full list of contraindications

Do not use this device if: you're under 18 · there's an open wound, abrasion, burn, or fresh scar in the area · you have active skin inflammation, eczema, psoriasis, or a fungal or bacterial infection there · you have severe acne, or are prone to keloids / abnormal scarring · you have rosacea · you have uncontrolled diabetes · you have a clotting disorder or take blood thinners · you have active cancer, or are receiving chemotherapy or radiation therapy · you have HIV/AIDS, hepatitis, or another serious systemic infection · you're pregnant / breastfeeding (only with medical consultation) · you're allergic to the disinfectant or the cosmetic you plan to use.

And never use it on the eyelids, the thin skin around the eyes, mucous membranes, lips, or any orifice.

The full list and the checklist →

Which devices were the studies cited here carried out with?

These studies measured microneedling as a method, with clinical devices (roller, motorized pen, radiofrequency device), under medical supervision. I refer to them. My aim is to bring this mechanism home as safely as possible, because many good effects are possible.

Today you're in a better position than you'll be tomorrow.

The collagen frame around the pore loses firmness year after year, and prevention is easier than restoration.

1 of 6
8 reviewsJudge.me

Dermastamp (1 mm)

Medical microneedling device
Before you buy, read the full picture. What it does exactly · what can go wrong · who it's not for, with a checker that might even tell you it's not for you right now. →

, microneedling device with detailed instructions for use;

We currently ship within the European Union only.

Choose your EU country to see the price in euros and the delivery options. The forint prices shown here apply to Hungary.

● in stock· 1–2 business days ·
Visa Mastercard Apple Pay Google Pay PayPal
8 reviewsWhat customers say (8)
Judge.me Verified by Judge.me

Independent, third-party platform. Only those who actually ordered from us get the "verified buyer" label.

Reviews translated from Hungarian.

  • Edit✓ verified buyer
    2026-07-24

    The parcel arrived on the third working day after my weekend order 😊 The product matches the description, using it is practically painless, afterwards there is a mild burning feeling and redness. I can report on the effect later, I trust that I have reason to hope. Before use I disinfected not only the stamp but the skin as well, with a spray made specifically for this. I found a face mask as a gift in the parcel, I am really glad about it, thank you!
    Special thanks for the detailed description :)
    Wishing you much success, kind regards: Edit

  • Mariann Szabó✓ verified buyer
    2026-06-19

    Very good quality product, less painful than the roller. The seller is very fair and kind, one detail was missing from my order and he handled it in a very humane way😊

  • B.Eszter
    2026-06-08

    Very professional product and seller. After the 4th time, other people noticed too that my skin is much nicer. Thank you!

Usage on video
  1. 1DisinfectionRinse the needle head with warm water, then disinfect it with 70% or stronger alcohol for 60–120 seconds, and wait until it is completely dry.
  2. 2Cleansing or hair washWash your hands with soap. Wash your face with a gentle foaming cleanser (micellar water isn't enough here), and your scalp with your usual shampoo. Start without makeup, on completely dry skin.
  3. 3StampingDivide the area into smaller sections and stamp gently and perpendicularly: you press down, lift, and don't drag. 4–6 times on each section, each time a little further along. Mild redness and tiny pinpoint bleeding are normal.
  4. 4AftercareThat evening, don't rub it, don't wash it off, and don't put anything on it. The next morning, foaming cleanser, Centella serum, moisturiser, SPF 50. For 24 hours, no makeup, swimming pool, sauna, tanning bed or strong sun. Retinoid and vitamin C: the user guide says 24 hours for retinoids, I wait 48 hours to be on the safe side. Acid exfoliants (AHA/BHA): at least one week, a published review recommends this. Every skin is different, find out what works for you. We've put together the ingredients for face and scalp separately: Tips and ingredients →

Watch it on video too:

Face
Scalp

Thinking of using it for hair loss? On the hair loss page you can check whether it suits your kind of hair loss.

What else do I need to buy?
  1. 170% alcohol: for disinfecting the stampBefore stamping, the stamp needs to soak in alcohol. The instructions for use name 70% isopropyl alcohol (IPA), and the steps call for a 70% or stronger alcohol-based disinfectant. 70% ethyl alcohol is such a disinfectant too. According to the disinfection guidance of the US Centers for Disease Control and Prevention (CDC), ethyl alcohol acts on a broader range of viruses, while isopropyl was slightly stronger on two tested bacteria (E. coli, S. aureus). I also show the process on video, in the "Usage on video" section, and I detail it in the instructions in the box.
  2. 2SPF 50 sunscreen: if you use it on your faceStamped skin is more sensitive to UV radiation, so you need SPF 50 every morning, starting the morning after.
  3. 3Gentle cleanser: if you use it on your faceYou need a gentle, foaming cleanser; micellar water isn't enough here. Start without makeup, on completely dry skin. The alcohol is for the stamp's needle head.
Why is it single-use?
  1. 1This is a manufacturer requirementThe device is registered as single-use (EU-MDR Class I): according to the manufacturer's instructions, one treatment, one person, and after that it can't be cleaned or reused. This is a requirement.
  2. 2Every session is a clean startThis way, you start every treatment with a new device, factory-treated with an electron beam and then disinfected by you before use.
  3. 3Less guesswork at homeYou don't have to wonder how many times you've used it, how clean it stayed, or whether the needles have degraded. One treatment equals one stamp: a simpler, more consistent, more hygienic routine.
Marci

I'm training to be a cosmetologist, and I found microneedling because of my own hair loss and skin problems. I want to bring this mechanism home as safely as possible, for you too. I stamp my own scalp weekly, and my face every 2–3 weeks.

Marci · dermastamp.hu

In your routine

How it fits into the routine you have now

  • what you already have
  • the stamp step
  • if you do not have it, add it in the cart

Eveningon treatment day

  1. Foaming face wash Micellar water is not enough here. Start with completely dry skin.
  2. Alcohol for the stamp Rinse it with warm water, soak it for at least 1–2 minutes in 70% or stronger alcohol, and let it dry.
  3. Dermastamp Section by section, perpendicular, 4–6 times, always moving it a little.
  4. Nothing Do not wash it off, do not rub it, and do not put anything on it.

Next morningon the treated skin

  1. Foaming face wash
  2. Centella serum After cleansing, under the moisturiser.
  3. Moisturiser
  4. SPF 50 Every morning from now on.

Back to your usualafter this long

  1. Makeup, pool, sauna 24 hoursTanning beds and strong sun too.
  2. Retinoid, vitamin C 48 hoursThe user guide says 24 hours for retinoids; to be on the safe side I wait 48.
  3. Acid exfoliant at least a weekAHA, BHA. A 2025 microneedling review advises against exfoliants for at least a week after the treatment.

Every skin is different, find out what works for you.

On the face one treatment every 2–3 weeks, always with a new stamp. Treat the same area again no sooner than 7–14 days later.

Peptides, copper peptide (GHK-Cu)?
I did not find a study that measured timing, so this is my own reading. I would put the peptide into the everyday evening routine, continuously, from the 2nd–3rd day after the treatment, and I would not force it into the hours after stamping. I would use it at a different time of day from vitamin C: vitamin C in the morning, peptide in the evening.
If you also have other treatments
With laser, chemical peels, fillers or any dermatological treatment, ask the person who does it first.

Why this device

Dermastamp, and an anonymous online stamp or roller

Dermastamp needle head, close-up Dermastamp Anonymous online stamp or roller
Which rules apply A medical device under the EU MDR (2017/745). So it can only be placed on the market if the manufacturer has drawn up its technical documentation, including the evaluation of the compatibility of the skin-contacting materials with tissues, runs risk management, the labelling complies, and the device is listed in EUDAMED with a unique device identifier (UDI). If it is not sold as a medical device, the General Product Safety Regulation (EU 2023/988) applies: it must be safe and the manufacturer must carry out a risk analysis, but it does not require a separate skin-compatibility evaluation, a UDI or EUDAMED registration.
Skin contact An independent laboratory ran the ISO 10993 skin compatibility tests on the manufacturer’s sample (effect on cells, skin irritation, sensitisation), and the sample passed all three. I will show you the reports in full on request. ?
Registration EU MDR class I medical device, in EUDAMED as UDI-DI 06976567878014. ?
Who you can turn to EU importer, registered as HU-IM-000051605. That is me. ?
Needle length Fixed 1.0 mm, not adjustable. Such devices are made with needles up to 3 mm.
Use Single use, a new stamp for every treatment. ?
Manufacturing Electron-beam (e-beam) treatment during manufacturing. According to the irradiation certificate of one production lot (M80260120): required at least 8 kGy, measured 8.11 kGy. Not sterile: you disinfect it before use. ?
Needle material SUS304 medical steel, gold coated (manufacturer’s declaration). ?
Protocol Step by step, in English, from someone who has been using it regularly himself for more than a year. ?

? = not stated or cannot be checked

Stamp or dermaroller?
A roller rolls, so the needles go in and come out at an angle. You press the stamp straight down and lift it straight up, on the hairy scalp too. I compared the two in detail here: Dermastamp or dermaroller.

What to expect?

Does it hurt? What to expect the first time?
Pain zones when microneedling the face, personal experience

Personal experience

Not pleasant, but in my own experience, clearly bearable. On the image I marked how sensitive I found each zone:

  • Green: easiest. Forehead, most of the face.
  • Yellow: noticeable, but comfortable. Around the eyebrows, nose bridge, jaw.
  • Red: more sensitive, but short-lived. Nose, under-eye area, around the mouth. Don't stamp near the eyelid or inner corner of the eye.

In my experience the scalp is less sensitive than the face. The first session feels the most unfamiliar, but based on customer feedback, most people expect it to be worse than it is.

How long does your skin stay red?
Skin before microneedling
Sunday · 21:00Before microneedling
Skin right after microneedling
Sunday · 21:15Right after
Skin the next morning, most of the redness gone
Monday · 7:30Next morning. Most of the redness is gone.

In my experience the redness on the face fades within a few hours, with little trace left by the next morning. In more sensitive zones (nose, around the mouth) it can take a bit longer. On the scalp it's less visible, mostly covered by hair, and settles faster.

If the symptoms get stronger or do not go away, or you see signs of infection (increasing pain, pus, fever), stop and see a healthcare professional.

No makeup for 24 hours. From the next morning, SPF 50 every morning.

What's allowed and what isn't after stamping? →

Personal experience, individual reactions may vary.

What shouldn't you use it for?

Don't use it on irritated, sunburned, actively inflamed, or infected skin. Not recommended for open wounds, active acne, eczema, or psoriasis-affected areas. If you take blood thinners or are under dermatological treatment, check with your doctor.

Age, pregnancy: Under 18. During pregnancy or breastfeeding only after talking to your doctor.

Your skin in the treated area: Open wound, abrasion, burn, fresh scar, active inflammation, eczema, psoriasis, fungal or bacterial infection. Severe acne, a tendency to keloids or abnormal scarring.

Illness, medication: Uncontrolled diabetes, a blood clotting disorder, blood thinners. Active cancer, chemotherapy or radiotherapy. HIV/AIDS, hepatitis or another severe infection.

Allergy: A known allergy to the disinfectant or to the cosmetics you use. If you have a metal allergy, especially to nickel, ask a healthcare professional first: the needles are SUS304 steel, gold-plated.

Where not to use it: Eyelids, the very thin skin around the eyes, mucous membranes, mouth, nostrils, genitals.

For hair loss: if the shedding came on suddenly or is patchy, or if scarring hair loss has been diagnosed, see a doctor about it. The stamp isn't the answer for these.

You'll find the full list of contraindications in the instructions for use that comes with every package. You can review the full risk picture here: Before you buy.

How do you know it's enough? How hard should you press?

Stamp gently and perpendicularly: you press down, lift, and don't drag. Divide the area into smaller sections and go over each one 4–6 times, each time a little further along. It's enough when you see mild redness and a few tiny pinpoint spots of blood here and there. The needle is a fixed 1.0 mm and can't be adjusted, so you can't accidentally go deeper.

The goal is even coverage.

Why 1 mm, and why isn't it adjustable?

I didn't want a deeper device for home use. On most of the facial skin, the 1 mm needle reaches at most the upper-middle band of the dermis, the layer where the collagen-producing cells (fibroblasts) are. A simple design: a needle stamp with no moving parts. Press down gently, the depth comes from the length of the needle. Fixed 1.0 mm, it can't be adjusted, so you can't accidentally go deeper. I didn't choose an adjustable one because I don't consider the moving parts of an adjustable head properly disinfectable at home.

When will I get it, and how do I pay?

Cash on delivery for one-time purchases: you pay when the parcel is in your hands. A subscription starts with card payment; card payment is also available for one-time purchases. Foxpost parcel locker 990 Ft, free from 21,000 Ft and with a subscription.

When can I see a change?

The studies on wrinkles and acne scars measured results months after the start, typically between 3 and 8 months. For hair loss, microneedling was added alongside minoxidil, for 3–6 months with regular sessions. These studies used other devices, and I cannot tell you your result in advance.

How does the subscription work?

With the scalp subscription a 4-pack arrives on its own every 4 weeks, with free parcel-locker delivery. In your account, under My subscription, you can skip a pack, pause or cancel. There is no minimum term, and a pack you have already paid for still arrives after you cancel. Payment is handled by the Shopify checkout; I never see your full card number.

Didn't answer your question? 120 questions and answers Dermastamp users have asked so far, from safety to dyed hair. Open the knowledge base →

Why is this device different?

80 GOLD-PLATED STEEL NEEDLES

Needle material

80 GOLD-PLATED STEEL NEEDLES

Medical-grade 304 stainless steel, with a genuine gold coating, the same base material used in surgical instruments. According to independent lab tests (TÜV SÜD, SGS) and the biocompatibility tests mandatory for skin-contact medical devices (EN ISO 10993-1, -5, -10), every value for the needle came in under the limit, and it passed TÜV's heavy-metal migration test (21 metals, including nickel release). If you have a known metal allergy, consult a doctor regardless, a known allergy is a contraindication per the instructions for use.

1 treatment = 1 stamp, for maximum hygiene

I tried dozens of models so you don't have to

Needle layout

I tried dozens of models so you don't have to

I tested dozens of microneedling devices, different needle densities, layouts, depths. The 80-needle stamp head, arranged in an even grid, gave the most even microchannels.

Marci · I've been microneedling my own skin for 4 years

Electron-beam treated (e-beam)

Hygiene

Electron-beam treated (e-beam)

It undergoes electron-beam treatment during manufacturing. Not a sterile device, disinfect it before each single use as per the instructions. It keeps its factory cleanliness until the packaging is opened.

Factory e-beam treated, single-use

*With a strong metal allergy, before first use it's worth testing the stamp with a few punctures on a small area of skin (e.g. the inner forearm) and observing the reaction for 48 hours.

E-beam hygiene step

E-BEAM hygiene step

This is what gives the clear protective cap its amber colour

Electron beam treatment during manufacturing

Important: not a sterile device. The effect applies while still sealed.

E-beam hygiene step

E-BEAM hygiene step

This is what gives the clear protective cap its amber colour

Electron beam treatment during manufacturing

Important: not a sterile device. The effect applies while still sealed.